Cylindrical/Square end mills NX
Numero di articolo: P15323682

Smooth-edged, medium version, POLYCHROM

Cutting tool substrate material - Hm MG10Form of the corner of the cutting edges - 45°Helix angle 45° Rake angle -20°Tool technologies - Milling tool with a partially polished bladeTool technologies - Milling tool with scaled slotTool technologies - Milling tool with a special protective chamferTool technologies - Milling tool with a variable helix angle
Cutting tool substrate material - Hm MG10Form of the corner of the cutting edges - 45°Helix angle 45° Rake angle -20°Tool technologies - Milling tool with a partially polished bladeTool technologies - Milling tool with scaled slotTool technologies - Milling tool with a special protective chamferTool technologies - Milling tool with a variable helix angle
Rm 850-1100 HRC 24-34Rm 1100-1300 HRC 34-42Rm 1300-1500 HRC 42-48HRC 48-56HRC 56-60Ti Titanium
Rm 850-1100 HRC 24-34Rm 1100-1300 HRC 34-42Rm 1300-1500 HRC 42-48HRC 48-56HRC 56-60Ti Titanium
Roughing HPC, laterally (partial cut)Roughing HPC, slots (full cut)Roughing HDC-S (partial cut)Roughing HDC-P (partial cut)
Roughing HPC, laterally (partial cut)Roughing HPC, slots (full cut)Roughing HDC-S (partial cut)Roughing HDC-P (partial cut)
Cylindrical/Square end mills NX Immagine del prodotto back L
Cylindrical/Square end mills NX Immagine del prodotto front L
Performance rating - X-Generation
  • Finishing
  • Finishing Schlichten_2
  • Roughing HDC
  • Roughing HDC SchruppenHDC_4
  • Roughing HPC
  • Roughing HPC SchruppenHPC_4
Full carbide tools with a cylindrical shank and a side clamping surface Schaftausfuehrung_HB
POLYCHROM
Performance rating - X-Generation
Ø Code
d1
e8
d2
h6
l1
l2
45°
45°
z
6822020122620.150.24
Al ToolExpert
Performance rating - X-Generation
Scaricamento:
XML DatenDXF 2DSTP 3D