Corner radius end mills MFC
Product ID: P8107453

Smooth-edged, normal version, short neck, High-performance penetration edge, central air/cooling channel, POLYCHROM

Cutting tool substrate material - Hm MG10Helix angle 45° Rake angle 10°Tool technologies - Milling tool with a partially polished bladeTool technologies - Milling tool with scaled slotTool technologies - Milling tool with special edge conditioninTool technologies - Milling tool with a variable helix angleTool technologies - High-performance penetration edgeTool technologies - Smooth transitions
Cutting tool substrate material - Hm MG10Helix angle 45° Rake angle 10°Tool technologies - Milling tool with a partially polished bladeTool technologies - Milling tool with scaled slotTool technologies - Milling tool with special edge conditioninTool technologies - Milling tool with a variable helix angleTool technologies - High-performance penetration edgeTool technologies - Smooth transitions
Rm < 850Rm 850-1100Rm 1100-1300Rm 1300-1500HRC 48-56Inox StainlessTi Titanium
Rm < 850Rm 850-1100Rm 1100-1300Rm 1300-1500HRC 48-56Inox StainlessTi Titanium
HPC Schruppen Eckradius SeitlichHPC Schruppen Eckradius NutenEckradius F TeilschnittCorner radius pre-finishing (Pre-Finishing PF) steep slopesRough milling (area clearance) with high-feed mills (High-Feed-Cutting)Corner radius Z-level roughing (Roughing R) for use in the corner radius areaRoughing HDC-S (partial cut)Roughing HDC-P (partial cut)Eckradius PF TeilschnittPenetration, helical interpolationPenetration, ramping
HPC Schruppen Eckradius SeitlichHPC Schruppen Eckradius NutenEckradius F TeilschnittCorner radius pre-finishing (Pre-Finishing PF) steep slopesRough milling (area clearance) with high-feed mills (High-Feed-Cutting)Corner radius Z-level roughing (Roughing R) for use in the corner radius areaRoughing HDC-S (partial cut)Roughing HDC-P (partial cut)Eckradius PF TeilschnittPenetration, helical interpolationPenetration, ramping
Corner radius end mills MFC product photo back L
Corner radius end mills MFC product photo front L
Performance rating - Performance
  • Finishing
  • Finishing Schlichten_3
  • Roughing HDC
  • Roughing HDC SchruppenHDC_4
  • Roughing HPC
  • Roughing HPC SchruppenHPC_3
Full carbide tools with a cylindrical shank Schaftausfuehrung_HA
POLYCHROM
Performance rating - Performance
Ø Code
d1
e8
d2
h5
d3
l1
l2
l3
l4
r
0/+0.03
α°
z
45310109.2722327.99311.504
Go to ToolExpert
Performance rating - Performance
Downloads:
XML DatenDXF 2DSTP 3D