Corner radius end mills
Product ID: P46207455
Smooth-edged, normal version, short neck, POLYCHROM
![Fine grain carbide. Hardness 1600 HV. Co content 10%. Cutting tool substrate material - Hm MG10](https://fraisa.cdn.celum.cloud/CDNIcon/1534.png)
![Helix angle 43° Rake angle 6° Helix angle 43° Rake angle 6°](https://fraisa.cdn.celum.cloud/CDNIcon/3565.png)
![Milling tool with a partially polished blade • Reinforcement of the exposed cutting corner • Absorption of high cutting forces Tool technologies - Milling tool with a partially polished blade](https://fraisa.cdn.celum.cloud/CDNIcon/373.png)
![Milling tool with special edge conditionin • Conditioning of the main cutting edge for increased stability • Increase the mechanical and thermal load on the cutting edge • General increase in the tool life Tool technologies - Milling tool with special edge conditionin](https://fraisa.cdn.celum.cloud/CDNIcon/340.png)
![Milling tool with a variable helix angle • Minimisation of oscillation and vibrations • Increase in material removal rates and tool life Tool technologies - Milling tool with a variable helix angle](https://fraisa.cdn.celum.cloud/CDNIcon/372.png)
![Smooth transitions • The shaft-neck-cutting edge transitions are fitted with smooth gradients and radii • Improved tool rigidity and therefore less radial deflection • Minimal step formation with several infeed depths • Higher mechanical load and therefore improved performance Tool technologies - Smooth transitions](https://fraisa.cdn.celum.cloud/CDNIcon/388.png)
![Fine grain carbide. Hardness 1600 HV. Co content 10%. Cutting tool substrate material - Hm MG10](https://fraisa.cdn.celum.cloud/CDNIcon/1534.png)
![Helix angle 43° Rake angle 6° Helix angle 43° Rake angle 6°](https://fraisa.cdn.celum.cloud/CDNIcon/3565.png)
![Milling tool with a partially polished blade • Reinforcement of the exposed cutting corner • Absorption of high cutting forces Tool technologies - Milling tool with a partially polished blade](https://fraisa.cdn.celum.cloud/CDNIcon/373.png)
![Milling tool with special edge conditionin • Conditioning of the main cutting edge for increased stability • Increase the mechanical and thermal load on the cutting edge • General increase in the tool life Tool technologies - Milling tool with special edge conditionin](https://fraisa.cdn.celum.cloud/CDNIcon/340.png)
![Milling tool with a variable helix angle • Minimisation of oscillation and vibrations • Increase in material removal rates and tool life Tool technologies - Milling tool with a variable helix angle](https://fraisa.cdn.celum.cloud/CDNIcon/372.png)
![Smooth transitions • The shaft-neck-cutting edge transitions are fitted with smooth gradients and radii • Improved tool rigidity and therefore less radial deflection • Minimal step formation with several infeed depths • Higher mechanical load and therefore improved performance Tool technologies - Smooth transitions](https://fraisa.cdn.celum.cloud/CDNIcon/388.png)
![particularly suitable for Rm < 850 HRC < 24 Rm < 850 HRC < 24](https://fraisa.cdn.celum.cloud/CDNIcon/699.png)
![particularly suitable for Rm 850-1100 HRC 24-34 Rm 850-1100 HRC 24-34](https://fraisa.cdn.celum.cloud/CDNIcon/693.png)
![good to adequate suitability for Rm 1100-1300 HRC 34-42 Rm 1100-1300 HRC 34-42](https://fraisa.cdn.celum.cloud/CDNIcon/694.png)
![particularly suitable for Inox Stainless Inox Stainless](https://fraisa.cdn.celum.cloud/CDNIcon/689.png)
![good to adequate suitability for Ti Titanium Ti Titanium](https://fraisa.cdn.celum.cloud/CDNIcon/700.png)
![particularly suitable for Rm < 850 HRC < 24 Rm < 850 HRC < 24](https://fraisa.cdn.celum.cloud/CDNIcon/699.png)
![particularly suitable for Rm 850-1100 HRC 24-34 Rm 850-1100 HRC 24-34](https://fraisa.cdn.celum.cloud/CDNIcon/693.png)
![good to adequate suitability for Rm 1100-1300 HRC 34-42 Rm 1100-1300 HRC 34-42](https://fraisa.cdn.celum.cloud/CDNIcon/694.png)
![particularly suitable for Inox Stainless Inox Stainless](https://fraisa.cdn.celum.cloud/CDNIcon/689.png)
![good to adequate suitability for Ti Titanium Ti Titanium](https://fraisa.cdn.celum.cloud/CDNIcon/700.png)
new!
![Corner radius end mills Corner radius end mills product photo back L](https://fraisa.cdn.celum.cloud/CDNProductDetail/6048.png)
![Corner radius end mills Corner radius end mills product photo front L](https://fraisa.cdn.celum.cloud/CDNProductDetail/6045.png)
![Products that have an exceedingly wide application area, average performance demands and a favourable price-performance ratio. Performance rating - Favora](https://fraisa.cdn.celum.cloud/CDNIcon/5874.png)
- Finishing
- Roughing HDC
- Roughing HPC
![Full carbide tools with a cylindrical shank: shank version in accordance with DIN 6535 HA Full carbide tools with a cylindrical shank Schaftausfuehrung_HA](https://fraisa.cdn.celum.cloud/CDNIcon/3319.png)
POLYCHROM
![Products that have an exceedingly wide application area, average performance demands and a favourable price-performance ratio. Performance rating - Favora](https://fraisa.cdn.celum.cloud/CDNIcon/5874.png)
Ø Code | d1 e8 | d2 h6 | d3 | l1 | l2 | l3 | l3max | l4 | r 0/+0.03 | z |
---|---|---|---|---|---|---|---|---|---|---|
455 | 10 | 10 | 9.2 | 74 | 22 | 30 | 30 | 33 | 2 | 4 |
![Products that have an exceedingly wide application area, average performance demands and a favourable price-performance ratio. Performance rating - Favora](https://fraisa.cdn.celum.cloud/CDNIcon/5874.png)
Smooth-edged, normal version, short neck, POLYCHROM
Ø Code | d1 e8 | d2 h6 | d3 | l1 | l2 | l3 | l3max | l4 | r 0/+0.03 | z |
---|---|---|---|---|---|---|---|---|---|---|
455 | 10 | 10 | 9.2 | 74 | 22 | 30 | 30 | 33 | 2 | 4 |