Cylindrical/Square end mills HX
Product ID: H8504300
Smooth-edged, normal version, short neck, High-performance penetration edge, DURO-Si
![Fine grain carbide. Hardness 1950 HV. Co content 8%. Characterised by a particularly high level of abrasion resistance. Cutting tool substrate material - HM XA](https://fraisa.cdn.celum.cloud/CDNIcon/627.png)
![The tool is furnished with a corner radius. For every diameter the size of the radius is listed in the corresponding data table of the catalogue. Form of the corner of the cutting edges - Corner radius](https://fraisa.cdn.celum.cloud/CDNIcon/323.png)
![Helix angle 45° Rake angle -10° Helix angle 45° Rake angle -10°](https://fraisa.cdn.celum.cloud/CDNIcon/3552.png)
![Milling tool with a partially polished blade • Reinforcement of the exposed cutting corner • Absorption of high cutting forces Tool technologies - Milling tool with a partially polished blade](https://fraisa.cdn.celum.cloud/CDNIcon/373.png)
![Milling tool with increased core diameter • Improved tool rigidity and less tool deflection • Higher performance in the area of the infeeds ap, ae and of the feed rate fz • Better component accuracy through less tool deflection Tool technologies - Milling tool with increased core diameter](https://fraisa.cdn.celum.cloud/CDNIcon/333.png)
![Milling tool with special edge conditionin • Conditioning of the main cutting edge for increased stability • Increase the mechanical and thermal load on the cutting edge • General increase in the tool life Tool technologies - Milling tool with special edge conditionin](https://fraisa.cdn.celum.cloud/CDNIcon/340.png)
![High-performance penetration edge • Easy-cutting high-performance penetration edge for high penetration angles • Higher performance, tool life and process reliability for penetration • High functionality with cutting data from ToolExpert HelixRamp Tool technologies - High-performance penetration edge](https://fraisa.cdn.celum.cloud/CDNIcon/378.png)
![Smooth transitions • The shaft-neck-cutting edge transitions are fitted with smooth gradients and radii • Improved tool rigidity and therefore less radial deflection • Minimal step formation with several infeed depths • Higher mechanical load and therefore improved performance Tool technologies - Smooth transitions](https://fraisa.cdn.celum.cloud/CDNIcon/388.png)
![Fine grain carbide. Hardness 1950 HV. Co content 8%. Characterised by a particularly high level of abrasion resistance. Cutting tool substrate material - HM XA](https://fraisa.cdn.celum.cloud/CDNIcon/627.png)
![The tool is furnished with a corner radius. For every diameter the size of the radius is listed in the corresponding data table of the catalogue. Form of the corner of the cutting edges - Corner radius](https://fraisa.cdn.celum.cloud/CDNIcon/323.png)
![Helix angle 45° Rake angle -10° Helix angle 45° Rake angle -10°](https://fraisa.cdn.celum.cloud/CDNIcon/3552.png)
![Milling tool with a partially polished blade • Reinforcement of the exposed cutting corner • Absorption of high cutting forces Tool technologies - Milling tool with a partially polished blade](https://fraisa.cdn.celum.cloud/CDNIcon/373.png)
![Milling tool with increased core diameter • Improved tool rigidity and less tool deflection • Higher performance in the area of the infeeds ap, ae and of the feed rate fz • Better component accuracy through less tool deflection Tool technologies - Milling tool with increased core diameter](https://fraisa.cdn.celum.cloud/CDNIcon/333.png)
![Milling tool with special edge conditionin • Conditioning of the main cutting edge for increased stability • Increase the mechanical and thermal load on the cutting edge • General increase in the tool life Tool technologies - Milling tool with special edge conditionin](https://fraisa.cdn.celum.cloud/CDNIcon/340.png)
![High-performance penetration edge • Easy-cutting high-performance penetration edge for high penetration angles • Higher performance, tool life and process reliability for penetration • High functionality with cutting data from ToolExpert HelixRamp Tool technologies - High-performance penetration edge](https://fraisa.cdn.celum.cloud/CDNIcon/378.png)
![Smooth transitions • The shaft-neck-cutting edge transitions are fitted with smooth gradients and radii • Improved tool rigidity and therefore less radial deflection • Minimal step formation with several infeed depths • Higher mechanical load and therefore improved performance Tool technologies - Smooth transitions](https://fraisa.cdn.celum.cloud/CDNIcon/388.png)
![particularly suitable for HRC 48-56 HRC 48-56](https://fraisa.cdn.celum.cloud/CDNIcon/683.png)
![particularly suitable for HRC 56-60 HRC 56-60](https://fraisa.cdn.celum.cloud/CDNIcon/685.png)
![particularly suitable for HRC > 60 HRC > 60](https://fraisa.cdn.celum.cloud/CDNIcon/687.png)
![HSS HSS](https://fraisa.cdn.celum.cloud/CDNIcon/4406.png)
![particularly suitable for HRC 48-56 HRC 48-56](https://fraisa.cdn.celum.cloud/CDNIcon/683.png)
![particularly suitable for HRC 56-60 HRC 56-60](https://fraisa.cdn.celum.cloud/CDNIcon/685.png)
![particularly suitable for HRC > 60 HRC > 60](https://fraisa.cdn.celum.cloud/CDNIcon/687.png)
![HSS HSS](https://fraisa.cdn.celum.cloud/CDNIcon/4406.png)
![Roughing HPC, laterally (partial cut) Roughing HPC, laterally (partial cut)](https://fraisa.cdn.celum.cloud/CDNIcon/531.png)
![Roughing HPC, slots (full cut) Roughing HPC, slots (full cut)](https://fraisa.cdn.celum.cloud/CDNIcon/532.png)
![Finishing (partial cut) (Finishing F) Finishing (partial cut) (Finishing F)](https://fraisa.cdn.celum.cloud/CDNIcon/520.png)
![Roughing HDC-S (partial cut) Roughing HDC-S (partial cut)](https://fraisa.cdn.celum.cloud/CDNIcon/530.png)
![Roughing HDC-P (partial cut) (Pre-Finishing PF) Roughing HDC-P (partial cut) (Pre-Finishing PF)](https://fraisa.cdn.celum.cloud/CDNIcon/527.png)
![Penetration, helical interpolation Penetration, helical interpolation](https://fraisa.cdn.celum.cloud/CDNIcon/518.png)
![Penetration, ramping Penetration, ramping](https://fraisa.cdn.celum.cloud/CDNIcon/519.png)
![Roughing HPC, laterally (partial cut) Roughing HPC, laterally (partial cut)](https://fraisa.cdn.celum.cloud/CDNIcon/531.png)
![Roughing HPC, slots (full cut) Roughing HPC, slots (full cut)](https://fraisa.cdn.celum.cloud/CDNIcon/532.png)
![Finishing (partial cut) (Finishing F) Finishing (partial cut) (Finishing F)](https://fraisa.cdn.celum.cloud/CDNIcon/520.png)
![Roughing HDC-S (partial cut) Roughing HDC-S (partial cut)](https://fraisa.cdn.celum.cloud/CDNIcon/530.png)
![Roughing HDC-P (partial cut) (Pre-Finishing PF) Roughing HDC-P (partial cut) (Pre-Finishing PF)](https://fraisa.cdn.celum.cloud/CDNIcon/527.png)
![Penetration, helical interpolation Penetration, helical interpolation](https://fraisa.cdn.celum.cloud/CDNIcon/518.png)
![Penetration, ramping Penetration, ramping](https://fraisa.cdn.celum.cloud/CDNIcon/519.png)
![Cylindrical/Square end mills HX Cylindrical/Square end mills HX product photo back L](https://fraisa.cdn.celum.cloud/CDNProductDetail/4587.png)
![Cylindrical/Square end mills HX Cylindrical/Square end mills HX product photo front L](https://fraisa.cdn.celum.cloud/CDNProductDetail/4419.png)
![Products that have a high level of specialisation for applications that go beyond (eXtra!) general applications and performance demands. Performance rating - X-Generation](https://fraisa.cdn.celum.cloud/CDNIcon/601.png)
- Finishing
- Roughing HDC
- Roughing HPC
![Full carbide tools with a cylindrical shank: shank version in accordance with DIN 6535 HA Full carbide tools with a cylindrical shank Schaftausfuehrung_HA](https://fraisa.cdn.celum.cloud/CDNIcon/3319.png)
DURO-Si
![Products that have a high level of specialisation for applications that go beyond (eXtra!) general applications and performance demands. Performance rating - X-Generation](https://fraisa.cdn.celum.cloud/CDNIcon/601.png)
Ø Code | d1 e8 | d2 h6 | d3 | l1 | l2 | l3 | l4 | r | α° | z |
---|---|---|---|---|---|---|---|---|---|---|
300 | 6 | 6 | 5.5 | 57 | 13 | 18.15 | 20 | 0.15 | 0 | 4 |
![Products that have a high level of specialisation for applications that go beyond (eXtra!) general applications and performance demands. Performance rating - X-Generation](https://fraisa.cdn.celum.cloud/CDNIcon/601.png)