Cylindrical/Square end mills SupraCarb®
Product ID: P15336684
Profiled, normal version, short neck, POLYCHROM
![Fine grain carbide. Hardness 1600 HV. Co content 10%. Cutting tool substrate material - Hm MG10](https://fraisa.cdn.celum.cloud/CDNIcon/1534.png)
![The corner between the front side blade and the circumference blade has a protective chamfer of 45°. The size of the protective chamfer is stated for each diameter in the data table on the catalogue page. Form of the corner of the cutting edges - 45°](https://fraisa.cdn.celum.cloud/CDNIcon/290.png)
![Helix angle 38° Rake angle 0° Helix angle 38° Rake angle 0°](https://fraisa.cdn.celum.cloud/CDNIcon/3533.png)
![Milling tool with a partially polished blade • Reinforcement of the exposed cutting corner • Absorption of high cutting forces Tool technologies - Milling tool with a partially polished blade](https://fraisa.cdn.celum.cloud/CDNIcon/373.png)
![Milling tool with special edge conditionin • Conditioning of the main cutting edge for increased stability • Increase the mechanical and thermal load on the cutting edge • General increase in the tool life Tool technologies - Milling tool with special edge conditionin](https://fraisa.cdn.celum.cloud/CDNIcon/340.png)
![Fine grain carbide. Hardness 1600 HV. Co content 10%. Cutting tool substrate material - Hm MG10](https://fraisa.cdn.celum.cloud/CDNIcon/1534.png)
![The corner between the front side blade and the circumference blade has a protective chamfer of 45°. The size of the protective chamfer is stated for each diameter in the data table on the catalogue page. Form of the corner of the cutting edges - 45°](https://fraisa.cdn.celum.cloud/CDNIcon/290.png)
![Helix angle 38° Rake angle 0° Helix angle 38° Rake angle 0°](https://fraisa.cdn.celum.cloud/CDNIcon/3533.png)
![Milling tool with a partially polished blade • Reinforcement of the exposed cutting corner • Absorption of high cutting forces Tool technologies - Milling tool with a partially polished blade](https://fraisa.cdn.celum.cloud/CDNIcon/373.png)
![Milling tool with special edge conditionin • Conditioning of the main cutting edge for increased stability • Increase the mechanical and thermal load on the cutting edge • General increase in the tool life Tool technologies - Milling tool with special edge conditionin](https://fraisa.cdn.celum.cloud/CDNIcon/340.png)
![particularly suitable for Rm < 850 Rm < 850](https://fraisa.cdn.celum.cloud/CDNIcon/699.png)
![particularly suitable for Rm 850-1100 Rm 850-1100](https://fraisa.cdn.celum.cloud/CDNIcon/693.png)
![good to adequate suitability for Rm 1100-1300 Rm 1100-1300](https://fraisa.cdn.celum.cloud/CDNIcon/694.png)
![particularly suitable for Inox Stainless Inox Stainless](https://fraisa.cdn.celum.cloud/CDNIcon/689.png)
![good to adequate suitability for Ti Titanium Ti Titanium](https://fraisa.cdn.celum.cloud/CDNIcon/700.png)
![particularly suitable for Rm < 850 Rm < 850](https://fraisa.cdn.celum.cloud/CDNIcon/699.png)
![particularly suitable for Rm 850-1100 Rm 850-1100](https://fraisa.cdn.celum.cloud/CDNIcon/693.png)
![good to adequate suitability for Rm 1100-1300 Rm 1100-1300](https://fraisa.cdn.celum.cloud/CDNIcon/694.png)
![particularly suitable for Inox Stainless Inox Stainless](https://fraisa.cdn.celum.cloud/CDNIcon/689.png)
![good to adequate suitability for Ti Titanium Ti Titanium](https://fraisa.cdn.celum.cloud/CDNIcon/700.png)
![Roughing HPC, laterally (partial cut) Roughing HPC, laterally (partial cut)](https://fraisa.cdn.celum.cloud/CDNIcon/531.png)
![Roughing HPC, slots (full cut) Roughing HPC, slots (full cut)](https://fraisa.cdn.celum.cloud/CDNIcon/532.png)
![Roughing HPC, laterally (partial cut) Roughing HPC, laterally (partial cut)](https://fraisa.cdn.celum.cloud/CDNIcon/531.png)
![Roughing HPC, slots (full cut) Roughing HPC, slots (full cut)](https://fraisa.cdn.celum.cloud/CDNIcon/532.png)
![Cylindrical/Square end mills SupraCarb® Cylindrical/Square end mills SupraCarb® product photo back L](https://fraisa.cdn.celum.cloud/CDNProductDetail/4704.png)
![Cylindrical/Square end mills SupraCarb® Cylindrical/Square end mills SupraCarb® product photo front L](https://fraisa.cdn.celum.cloud/CDNProductDetail/4538.png)
![Performance rating - Performance Performance rating - Performance](https://fraisa.cdn.celum.cloud/CDNIcon/5873.png)
- Finishing
- Roughing
![Full carbide tools with a cylindrical shank and a side clamping surface. Shank version in accordance with DIN 6535 HB Full carbide tools with a cylindrical shank and a side clamping surface Schaftausfuehrung_HB](https://fraisa.cdn.celum.cloud/CDNIcon/3320.png)
POLYCHROM
![Performance rating - Performance Performance rating - Performance](https://fraisa.cdn.celum.cloud/CDNIcon/5873.png)
Ø Code | d1 e8 | d2 h6 | d3 | l1 | l2 | l3 | l4 | 45° | α° | z |
---|---|---|---|---|---|---|---|---|---|---|
684 | 20 | 20 | 19 | 104 | 38 | 52.13 | 53 | 0.6 | 0 | 6 |
![Performance rating - Performance Performance rating - Performance](https://fraisa.cdn.celum.cloud/CDNIcon/5873.png)
Profiled, normal version, short neck, POLYCHROM
Ø Code | d1 e8 | d2 h6 | d3 | l1 | l2 | l3 | l4 | 45° | α° | z |
---|---|---|---|---|---|---|---|---|---|---|
684 | 20 | 20 | 19 | 104 | 38 | 52.13 | 53 | 0.6 | 0 | 6 |