Cylindrical/Square end mills
Product ID: P45217140
Smooth-edged, normal version, short neck, POLYCHROM
![Fine grain carbide. Hardness 1600 HV. Co content 10%. Cutting tool substrate material - Hm MG10](https://fraisa.cdn.celum.cloud/CDNIcon/1534.png)
![The corner between the front side blade and the circumference blade has a protective chamfer of 45°. The size of the protective chamfer is stated for each diameter in the data table on the catalogue page. Form of the corner of the cutting edges - 45°](https://fraisa.cdn.celum.cloud/CDNIcon/290.png)
![Helix angle 40° Rake angle 6° Helix angle 40° Rake angle 6°](https://fraisa.cdn.celum.cloud/CDNIcon/3545.png)
![Milling tool with a partially polished blade • Reinforcement of the exposed cutting corner • Absorption of high cutting forces Tool technologies - Milling tool with a partially polished blade](https://fraisa.cdn.celum.cloud/CDNIcon/373.png)
![Milling tool with a variable helix angle • Minimisation of oscillation and vibrations • Increase in material removal rates and tool life Tool technologies - Milling tool with a variable helix angle](https://fraisa.cdn.celum.cloud/CDNIcon/372.png)
![Fine grain carbide. Hardness 1600 HV. Co content 10%. Cutting tool substrate material - Hm MG10](https://fraisa.cdn.celum.cloud/CDNIcon/1534.png)
![The corner between the front side blade and the circumference blade has a protective chamfer of 45°. The size of the protective chamfer is stated for each diameter in the data table on the catalogue page. Form of the corner of the cutting edges - 45°](https://fraisa.cdn.celum.cloud/CDNIcon/290.png)
![Helix angle 40° Rake angle 6° Helix angle 40° Rake angle 6°](https://fraisa.cdn.celum.cloud/CDNIcon/3545.png)
![Milling tool with a partially polished blade • Reinforcement of the exposed cutting corner • Absorption of high cutting forces Tool technologies - Milling tool with a partially polished blade](https://fraisa.cdn.celum.cloud/CDNIcon/373.png)
![Milling tool with a variable helix angle • Minimisation of oscillation and vibrations • Increase in material removal rates and tool life Tool technologies - Milling tool with a variable helix angle](https://fraisa.cdn.celum.cloud/CDNIcon/372.png)
![particularly suitable for Rm < 850 HRC < 24 Rm < 850 HRC < 24](https://fraisa.cdn.celum.cloud/CDNIcon/699.png)
![particularly suitable for Rm 850-1100 HRC 24-34 Rm 850-1100 HRC 24-34](https://fraisa.cdn.celum.cloud/CDNIcon/693.png)
![good to adequate suitability for Rm 1100-1300 HRC 34-42 Rm 1100-1300 HRC 34-42](https://fraisa.cdn.celum.cloud/CDNIcon/694.png)
![particularly suitable for Inox Stainless Inox Stainless](https://fraisa.cdn.celum.cloud/CDNIcon/689.png)
![good to adequate suitability for Ti Titanium Ti Titanium](https://fraisa.cdn.celum.cloud/CDNIcon/700.png)
![particularly suitable for Rm < 850 HRC < 24 Rm < 850 HRC < 24](https://fraisa.cdn.celum.cloud/CDNIcon/699.png)
![particularly suitable for Rm 850-1100 HRC 24-34 Rm 850-1100 HRC 24-34](https://fraisa.cdn.celum.cloud/CDNIcon/693.png)
![good to adequate suitability for Rm 1100-1300 HRC 34-42 Rm 1100-1300 HRC 34-42](https://fraisa.cdn.celum.cloud/CDNIcon/694.png)
![particularly suitable for Inox Stainless Inox Stainless](https://fraisa.cdn.celum.cloud/CDNIcon/689.png)
![good to adequate suitability for Ti Titanium Ti Titanium](https://fraisa.cdn.celum.cloud/CDNIcon/700.png)
![Roughing HPC, laterally (partial cut) Roughing HPC, laterally (partial cut)](https://fraisa.cdn.celum.cloud/CDNIcon/531.png)
![Roughing HPC, slots (full cut) Roughing HPC, slots (full cut)](https://fraisa.cdn.celum.cloud/CDNIcon/532.png)
![Roughing HPC, laterally (partial cut) Roughing HPC, laterally (partial cut)](https://fraisa.cdn.celum.cloud/CDNIcon/531.png)
![Roughing HPC, slots (full cut) Roughing HPC, slots (full cut)](https://fraisa.cdn.celum.cloud/CDNIcon/532.png)
![Cylindrical/Square end mills Cylindrical/Square end mills product photo back L](https://fraisa.cdn.celum.cloud/CDNProductDetail/5028.png)
![Cylindrical/Square end mills Cylindrical/Square end mills product photo front L](https://fraisa.cdn.celum.cloud/CDNProductDetail/4866.png)
![Products that have an exceedingly wide application area, average performance demands and a favourable price-performance ratio. Performance rating - Favora](https://fraisa.cdn.celum.cloud/CDNIcon/5874.png)
Ø Code | d1 e8 | d2 h6 | d3 | l1 | l2 | l3 | l3max | l4 | 45° | 45° | z |
---|---|---|---|---|---|---|---|---|---|---|---|
140 | 2 | 6 | 1.9 | 57 | 7 | 10 | 10 | 18.31 | 0.05 | 0.1 | 4 |
![Products that have an exceedingly wide application area, average performance demands and a favourable price-performance ratio. Performance rating - Favora](https://fraisa.cdn.celum.cloud/CDNIcon/5874.png)
Smooth-edged, normal version, short neck, POLYCHROM
Ø Code | d1 e8 | d2 h6 | d3 | l1 | l2 | l3 | l3max | l4 | 45° | 45° | z |
---|---|---|---|---|---|---|---|---|---|---|---|
140 | 2 | 6 | 1.9 | 57 | 7 | 10 | 10 | 18.31 | 0.05 | 0.1 | 4 |