Cylindrical/Square end mills
Product ID: P45282610
Smooth-edged, medium version, neck, POLYCHROM
![Fine grain carbide. Hardness 1600 HV. Co content 10%. Cutting tool substrate material - Hm MG10](https://fraisa.cdn.celum.cloud/CDNIcon/1534.png)
![The tool is furnished with a corner radius. For every diameter the size of the radius is listed in the corresponding data table of the catalogue. Form of the corner of the cutting edges - Corner radius](https://fraisa.cdn.celum.cloud/CDNIcon/323.png)
![Helix angle 43° Rake angle 3° Helix angle 43° Rake angle 3°](https://fraisa.cdn.celum.cloud/CDNIcon/3561.png)
![Milling tool with a partially polished blade • Reinforcement of the exposed cutting corner • Absorption of high cutting forces Tool technologies - Milling tool with a partially polished blade](https://fraisa.cdn.celum.cloud/CDNIcon/373.png)
![Smooth transitions • The shaft-neck-cutting edge transitions are fitted with smooth gradients and radii • Improved tool rigidity and therefore less radial deflection • Minimal step formation with several infeed depths • Higher mechanical load and therefore improved performance Tool technologies - Smooth transitions](https://fraisa.cdn.celum.cloud/CDNIcon/388.png)
![Fine grain carbide. Hardness 1600 HV. Co content 10%. Cutting tool substrate material - Hm MG10](https://fraisa.cdn.celum.cloud/CDNIcon/1534.png)
![The tool is furnished with a corner radius. For every diameter the size of the radius is listed in the corresponding data table of the catalogue. Form of the corner of the cutting edges - Corner radius](https://fraisa.cdn.celum.cloud/CDNIcon/323.png)
![Helix angle 43° Rake angle 3° Helix angle 43° Rake angle 3°](https://fraisa.cdn.celum.cloud/CDNIcon/3561.png)
![Milling tool with a partially polished blade • Reinforcement of the exposed cutting corner • Absorption of high cutting forces Tool technologies - Milling tool with a partially polished blade](https://fraisa.cdn.celum.cloud/CDNIcon/373.png)
![Smooth transitions • The shaft-neck-cutting edge transitions are fitted with smooth gradients and radii • Improved tool rigidity and therefore less radial deflection • Minimal step formation with several infeed depths • Higher mechanical load and therefore improved performance Tool technologies - Smooth transitions](https://fraisa.cdn.celum.cloud/CDNIcon/388.png)
![particularly suitable for Rm < 850 HRC < 24 Rm < 850 HRC < 24](https://fraisa.cdn.celum.cloud/CDNIcon/699.png)
![particularly suitable for Rm 850-1100 HRC 24-34 Rm 850-1100 HRC 24-34](https://fraisa.cdn.celum.cloud/CDNIcon/693.png)
![good to adequate suitability for Rm 1100-1300 HRC 34-42 Rm 1100-1300 HRC 34-42](https://fraisa.cdn.celum.cloud/CDNIcon/694.png)
![particularly suitable for Inox Stainless Inox Stainless](https://fraisa.cdn.celum.cloud/CDNIcon/689.png)
![particularly suitable for Rm < 850 HRC < 24 Rm < 850 HRC < 24](https://fraisa.cdn.celum.cloud/CDNIcon/699.png)
![particularly suitable for Rm 850-1100 HRC 24-34 Rm 850-1100 HRC 24-34](https://fraisa.cdn.celum.cloud/CDNIcon/693.png)
![good to adequate suitability for Rm 1100-1300 HRC 34-42 Rm 1100-1300 HRC 34-42](https://fraisa.cdn.celum.cloud/CDNIcon/694.png)
![particularly suitable for Inox Stainless Inox Stainless](https://fraisa.cdn.celum.cloud/CDNIcon/689.png)
new!
![Cylindrical/Square end mills Cylindrical/Square end mills product photo back L](https://fraisa.cdn.celum.cloud/CDNProductDetail/6347.png)
![Cylindrical/Square end mills Cylindrical/Square end mills product photo front L](https://fraisa.cdn.celum.cloud/CDNProductDetail/6338.png)
![Products that have an exceedingly wide application area, average performance demands and a favourable price-performance ratio. Performance rating - Favora](https://fraisa.cdn.celum.cloud/CDNIcon/5874.png)
- Finishing
- Roughing HDC
- Roughing HPC
![Full carbide tools with a cylindrical shank: shank version in accordance with DIN 6535 HA Full carbide tools with a cylindrical shank Schaftausfuehrung_HA](https://fraisa.cdn.celum.cloud/CDNIcon/3319.png)
POLYCHROM
![Products that have an exceedingly wide application area, average performance demands and a favourable price-performance ratio. Performance rating - Favora](https://fraisa.cdn.celum.cloud/CDNIcon/5874.png)
Ø Code | d1 e8 | d2 h5 | d3 | l1 | l2 | l3 | l3max | l4 | r | 45° | z |
---|---|---|---|---|---|---|---|---|---|---|---|
610 | 16 | 16 | 15 | 125 | 36 | 72 | 72 | 76.27 | 0.2 | 0.2 | 4 |
![Products that have an exceedingly wide application area, average performance demands and a favourable price-performance ratio. Performance rating - Favora](https://fraisa.cdn.celum.cloud/CDNIcon/5874.png)
Smooth-edged, medium version, neck, POLYCHROM
Ø Code | d1 e8 | d2 h5 | d3 | l1 | l2 | l3 | l3max | l4 | r | 45° | z |
---|---|---|---|---|---|---|---|---|---|---|---|
610 | 16 | 16 | 15 | 125 | 36 | 72 | 72 | 76.27 | 0.2 | 0.2 | 4 |