Corner radius end mills E-Cut
Product ID: P8307306
Smooth-edged, normal version, short neck, POLYCHROM
![Fine grain carbide. Hardness 1600 HV. Co content 10%. Cutting tool substrate material - Hm MG10](https://fraisa.cdn.celum.cloud/CDNIcon/1534.png)
![Helix angle 43° Rake angle 6° Helix angle 43° Rake angle 6°](https://fraisa.cdn.celum.cloud/CDNIcon/3565.png)
![Milling tool with a partially polished blade • Reinforcement of the exposed cutting corner • Absorption of high cutting forces Tool technologies - Milling tool with a partially polished blade](https://fraisa.cdn.celum.cloud/CDNIcon/373.png)
![Milling tool with special edge conditionin • Conditioning of the main cutting edge for increased stability • Increase the mechanical and thermal load on the cutting edge • General increase in the tool life Tool technologies - Milling tool with special edge conditionin](https://fraisa.cdn.celum.cloud/CDNIcon/340.png)
![Milling tool with a variable helix angle • Minimisation of oscillation and vibrations • Increase in material removal rates and tool life Tool technologies - Milling tool with a variable helix angle](https://fraisa.cdn.celum.cloud/CDNIcon/372.png)
![Smooth transitions • The shaft-neck-cutting edge transitions are fitted with smooth gradients and radii • Improved tool rigidity and therefore less radial deflection • Minimal step formation with several infeed depths • Higher mechanical load and therefore improved performance Tool technologies - Smooth transitions](https://fraisa.cdn.celum.cloud/CDNIcon/388.png)
![Fine grain carbide. Hardness 1600 HV. Co content 10%. Cutting tool substrate material - Hm MG10](https://fraisa.cdn.celum.cloud/CDNIcon/1534.png)
![Helix angle 43° Rake angle 6° Helix angle 43° Rake angle 6°](https://fraisa.cdn.celum.cloud/CDNIcon/3565.png)
![Milling tool with a partially polished blade • Reinforcement of the exposed cutting corner • Absorption of high cutting forces Tool technologies - Milling tool with a partially polished blade](https://fraisa.cdn.celum.cloud/CDNIcon/373.png)
![Milling tool with special edge conditionin • Conditioning of the main cutting edge for increased stability • Increase the mechanical and thermal load on the cutting edge • General increase in the tool life Tool technologies - Milling tool with special edge conditionin](https://fraisa.cdn.celum.cloud/CDNIcon/340.png)
![Milling tool with a variable helix angle • Minimisation of oscillation and vibrations • Increase in material removal rates and tool life Tool technologies - Milling tool with a variable helix angle](https://fraisa.cdn.celum.cloud/CDNIcon/372.png)
![Smooth transitions • The shaft-neck-cutting edge transitions are fitted with smooth gradients and radii • Improved tool rigidity and therefore less radial deflection • Minimal step formation with several infeed depths • Higher mechanical load and therefore improved performance Tool technologies - Smooth transitions](https://fraisa.cdn.celum.cloud/CDNIcon/388.png)
![particularly suitable for Rm < 850 Rm < 850](https://fraisa.cdn.celum.cloud/CDNIcon/699.png)
![particularly suitable for Rm 850-1100 Rm 850-1100](https://fraisa.cdn.celum.cloud/CDNIcon/693.png)
![particularly suitable for Rm 1100-1300 Rm 1100-1300](https://fraisa.cdn.celum.cloud/CDNIcon/695.png)
![particularly suitable for Rm 1300-1500 Rm 1300-1500](https://fraisa.cdn.celum.cloud/CDNIcon/697.png)
![good to adequate suitability for HRC 48-56 HRC 48-56](https://fraisa.cdn.celum.cloud/CDNIcon/682.png)
![particularly suitable for Inox Stainless Inox Stainless](https://fraisa.cdn.celum.cloud/CDNIcon/689.png)
![good to adequate suitability for Ti Titanium Ti Titanium](https://fraisa.cdn.celum.cloud/CDNIcon/700.png)
![particularly suitable for Rm < 850 Rm < 850](https://fraisa.cdn.celum.cloud/CDNIcon/699.png)
![particularly suitable for Rm 850-1100 Rm 850-1100](https://fraisa.cdn.celum.cloud/CDNIcon/693.png)
![particularly suitable for Rm 1100-1300 Rm 1100-1300](https://fraisa.cdn.celum.cloud/CDNIcon/695.png)
![particularly suitable for Rm 1300-1500 Rm 1300-1500](https://fraisa.cdn.celum.cloud/CDNIcon/697.png)
![good to adequate suitability for HRC 48-56 HRC 48-56](https://fraisa.cdn.celum.cloud/CDNIcon/682.png)
![particularly suitable for Inox Stainless Inox Stainless](https://fraisa.cdn.celum.cloud/CDNIcon/689.png)
![good to adequate suitability for Ti Titanium Ti Titanium](https://fraisa.cdn.celum.cloud/CDNIcon/700.png)
![Roughing HPC, laterally (partial cut) Roughing HPC, laterally (partial cut)](https://fraisa.cdn.celum.cloud/CDNIcon/531.png)
![Roughing HPC, slots (full cut) Roughing HPC, slots (full cut)](https://fraisa.cdn.celum.cloud/CDNIcon/532.png)
![Finishing (partial cut) (Finishing F) Finishing (partial cut) (Finishing F)](https://fraisa.cdn.celum.cloud/CDNIcon/520.png)
![HPC Schruppen Eckradius Seitlich HPC Schruppen Eckradius Seitlich](https://fraisa.cdn.celum.cloud/CDNIcon/3348.png)
![HPC Schruppen Eckradius Nuten HPC Schruppen Eckradius Nuten](https://fraisa.cdn.celum.cloud/CDNIcon/3349.png)
![Eckradius F Teilschnitt Eckradius F Teilschnitt](https://fraisa.cdn.celum.cloud/CDNIcon/3572.png)
![Roughing HDC-S (partial cut) Roughing HDC-S (partial cut)](https://fraisa.cdn.celum.cloud/CDNIcon/530.png)
![Roughing HDC-P (partial cut) Roughing HDC-P (partial cut)](https://fraisa.cdn.celum.cloud/CDNIcon/529.png)
![Roughing HDC-P (partial cut) (Pre-Finishing PF) Roughing HDC-P (partial cut) (Pre-Finishing PF)](https://fraisa.cdn.celum.cloud/CDNIcon/527.png)
![Eckradius PF Teilschnitt Eckradius PF Teilschnitt](https://fraisa.cdn.celum.cloud/CDNIcon/3578.png)
![Penetration, helical interpolation Penetration, helical interpolation](https://fraisa.cdn.celum.cloud/CDNIcon/518.png)
![Penetration, ramping Penetration, ramping](https://fraisa.cdn.celum.cloud/CDNIcon/519.png)
![Roughing HPC, laterally (partial cut) Roughing HPC, laterally (partial cut)](https://fraisa.cdn.celum.cloud/CDNIcon/531.png)
![Roughing HPC, slots (full cut) Roughing HPC, slots (full cut)](https://fraisa.cdn.celum.cloud/CDNIcon/532.png)
![Finishing (partial cut) (Finishing F) Finishing (partial cut) (Finishing F)](https://fraisa.cdn.celum.cloud/CDNIcon/520.png)
![HPC Schruppen Eckradius Seitlich HPC Schruppen Eckradius Seitlich](https://fraisa.cdn.celum.cloud/CDNIcon/3348.png)
![HPC Schruppen Eckradius Nuten HPC Schruppen Eckradius Nuten](https://fraisa.cdn.celum.cloud/CDNIcon/3349.png)
![Eckradius F Teilschnitt Eckradius F Teilschnitt](https://fraisa.cdn.celum.cloud/CDNIcon/3572.png)
![Roughing HDC-S (partial cut) Roughing HDC-S (partial cut)](https://fraisa.cdn.celum.cloud/CDNIcon/530.png)
![Roughing HDC-P (partial cut) Roughing HDC-P (partial cut)](https://fraisa.cdn.celum.cloud/CDNIcon/529.png)
![Roughing HDC-P (partial cut) (Pre-Finishing PF) Roughing HDC-P (partial cut) (Pre-Finishing PF)](https://fraisa.cdn.celum.cloud/CDNIcon/527.png)
![Eckradius PF Teilschnitt Eckradius PF Teilschnitt](https://fraisa.cdn.celum.cloud/CDNIcon/3578.png)
![Penetration, helical interpolation Penetration, helical interpolation](https://fraisa.cdn.celum.cloud/CDNIcon/518.png)
![Penetration, ramping Penetration, ramping](https://fraisa.cdn.celum.cloud/CDNIcon/519.png)
![Corner radius end mills E-Cut Corner radius end mills E-Cut product photo back L](https://fraisa.cdn.celum.cloud/CDNProductDetail/4647.png)
![Corner radius end mills E-Cut Corner radius end mills E-Cut product photo front L](https://fraisa.cdn.celum.cloud/CDNProductDetail/4480.png)
![Performance rating - Performance Performance rating - Performance](https://fraisa.cdn.celum.cloud/CDNIcon/5873.png)
- Finishing
- Roughing HDC
- Roughing HPC
![Full carbide tools with a cylindrical shank: shank version in accordance with DIN 6535 HA Full carbide tools with a cylindrical shank Schaftausfuehrung_HA](https://fraisa.cdn.celum.cloud/CDNIcon/3319.png)
POLYCHROM
![Performance rating - Performance Performance rating - Performance](https://fraisa.cdn.celum.cloud/CDNIcon/5873.png)
Ø Code | d1 e8 | d2 h6 | d3 | l1 | l2 | l3 | l4 | r 0/+0.03 | α° | z |
---|---|---|---|---|---|---|---|---|---|---|
306 | 6 | 6 | 5.5 | 57 | 13.5 | 18 | 19.85 | 2 | 0 | 4 |
![Performance rating - Performance Performance rating - Performance](https://fraisa.cdn.celum.cloud/CDNIcon/5873.png)
Smooth-edged, normal version, short neck, POLYCHROM
Ø Code | d1 e8 | d2 h6 | d3 | l1 | l2 | l3 | l4 | r 0/+0.03 | α° | z |
---|---|---|---|---|---|---|---|---|---|---|
306 | 6 | 6 | 5.5 | 57 | 13.5 | 18 | 19.85 | 2 | 0 | 4 |