Cylindrical/Square end mills HX
Product ID: H8604610

Smooth-edged, normal version, short neck, High-performance penetration edge, DURO-Si

Cutting tool substrate material - HM XAForm of the corner of the cutting edges - Corner radiusHelix angle 45° Rake angle -10°Tool technologies - Milling tool with a partially polished bladeTool technologies - Milling tool with increased core diameterTool technologies - Milling tool with special edge conditioninTool technologies - High-performance penetration edgeTool technologies - Smooth transitions
Cutting tool substrate material - HM XAForm of the corner of the cutting edges - Corner radiusHelix angle 45° Rake angle -10°Tool technologies - Milling tool with a partially polished bladeTool technologies - Milling tool with increased core diameterTool technologies - Milling tool with special edge conditioninTool technologies - High-performance penetration edgeTool technologies - Smooth transitions
HRC 48-56HRC 56-60HRC > 60HSS
HRC 48-56HRC 56-60HRC > 60HSS
Roughing HPC, laterally (partial cut)Roughing HPC, slots (full cut)Finishing (partial cut) (Finishing F)Roughing HDC-S (partial cut)Roughing HDC-P (partial cut) (Pre-Finishing PF)Penetration, helical interpolationPenetration, ramping
Roughing HPC, laterally (partial cut)Roughing HPC, slots (full cut)Finishing (partial cut) (Finishing F)Roughing HDC-S (partial cut)Roughing HDC-P (partial cut) (Pre-Finishing PF)Penetration, helical interpolationPenetration, ramping
Cylindrical/Square end mills HX product photo back L
Cylindrical/Square end mills HX product photo front L
Performance rating - X-Generation
  • Finishing
  • Finishing Schlichten_2
  • Roughing HDC
  • Roughing HDC SchruppenHDC_4
  • Roughing HPC
  • Roughing HPC SchruppenHPC_4
Full carbide tools with a cylindrical shank and a side clamping surface Schaftausfuehrung_HB
DURO-Si
Performance rating - X-Generation
Ø Code
d1
e8
d2
h6
d3
l1
l2
l3
l4
r
α°
z
610161615923238.73430.204
Go to ToolExpert
Performance rating - X-Generation
Downloads:
XML DatenDXF 2DSTP 3D