Corner radius end mills HX
Product ID: H8507218
Smooth-edged, normal version, short neck, High-performance penetration edge, DURO-Si
![Fine grain carbide. Hardness 1950 HV. Co content 8%. Characterised by a particularly high level of abrasion resistance. Cutting tool substrate material - HM XA](https://fraisa.cdn.celum.cloud/CDNIcon/627.png)
![Helix angle 45° Rake angle -10° Helix angle 45° Rake angle -10°](https://fraisa.cdn.celum.cloud/CDNIcon/3552.png)
![Corner radius end mill with a highly precise radius tolerance • Specially designed tolerances simplify the programming and the secure finish of the end contour • Highly precise tolerance field for high dimensional accuracy Tool technologies - Corner radius end mill with a highly precise radius tolerance](https://fraisa.cdn.celum.cloud/CDNIcon/325.png)
![Milling tool with a partially polished blade • Reinforcement of the exposed cutting corner • Absorption of high cutting forces Tool technologies - Milling tool with a partially polished blade](https://fraisa.cdn.celum.cloud/CDNIcon/373.png)
![Milling tool with increased core diameter • Improved tool rigidity and less tool deflection • Higher performance in the area of the infeeds ap, ae and of the feed rate fz • Better component accuracy through less tool deflection Tool technologies - Milling tool with increased core diameter](https://fraisa.cdn.celum.cloud/CDNIcon/333.png)
![Milling tool with special edge conditionin • Conditioning of the main cutting edge for increased stability • Increase the mechanical and thermal load on the cutting edge • General increase in the tool life Tool technologies - Milling tool with special edge conditionin](https://fraisa.cdn.celum.cloud/CDNIcon/340.png)
![High-performance penetration edge • Easy-cutting high-performance penetration edge for high penetration angles • Higher performance, tool life and process reliability for penetration • High functionality with cutting data from ToolExpert HelixRamp Tool technologies - High-performance penetration edge](https://fraisa.cdn.celum.cloud/CDNIcon/378.png)
![Smooth transitions • The shaft-neck-cutting edge transitions are fitted with smooth gradients and radii • Improved tool rigidity and therefore less radial deflection • Minimal step formation with several infeed depths • Higher mechanical load and therefore improved performance Tool technologies - Smooth transitions](https://fraisa.cdn.celum.cloud/CDNIcon/388.png)
![Fine grain carbide. Hardness 1950 HV. Co content 8%. Characterised by a particularly high level of abrasion resistance. Cutting tool substrate material - HM XA](https://fraisa.cdn.celum.cloud/CDNIcon/627.png)
![Helix angle 45° Rake angle -10° Helix angle 45° Rake angle -10°](https://fraisa.cdn.celum.cloud/CDNIcon/3552.png)
![Corner radius end mill with a highly precise radius tolerance • Specially designed tolerances simplify the programming and the secure finish of the end contour • Highly precise tolerance field for high dimensional accuracy Tool technologies - Corner radius end mill with a highly precise radius tolerance](https://fraisa.cdn.celum.cloud/CDNIcon/325.png)
![Milling tool with a partially polished blade • Reinforcement of the exposed cutting corner • Absorption of high cutting forces Tool technologies - Milling tool with a partially polished blade](https://fraisa.cdn.celum.cloud/CDNIcon/373.png)
![Milling tool with increased core diameter • Improved tool rigidity and less tool deflection • Higher performance in the area of the infeeds ap, ae and of the feed rate fz • Better component accuracy through less tool deflection Tool technologies - Milling tool with increased core diameter](https://fraisa.cdn.celum.cloud/CDNIcon/333.png)
![Milling tool with special edge conditionin • Conditioning of the main cutting edge for increased stability • Increase the mechanical and thermal load on the cutting edge • General increase in the tool life Tool technologies - Milling tool with special edge conditionin](https://fraisa.cdn.celum.cloud/CDNIcon/340.png)
![High-performance penetration edge • Easy-cutting high-performance penetration edge for high penetration angles • Higher performance, tool life and process reliability for penetration • High functionality with cutting data from ToolExpert HelixRamp Tool technologies - High-performance penetration edge](https://fraisa.cdn.celum.cloud/CDNIcon/378.png)
![Smooth transitions • The shaft-neck-cutting edge transitions are fitted with smooth gradients and radii • Improved tool rigidity and therefore less radial deflection • Minimal step formation with several infeed depths • Higher mechanical load and therefore improved performance Tool technologies - Smooth transitions](https://fraisa.cdn.celum.cloud/CDNIcon/388.png)
![particularly suitable for HRC 48-56 HRC 48-56](https://fraisa.cdn.celum.cloud/CDNIcon/683.png)
![particularly suitable for HRC 56-60 HRC 56-60](https://fraisa.cdn.celum.cloud/CDNIcon/685.png)
![particularly suitable for HRC > 60 HRC > 60](https://fraisa.cdn.celum.cloud/CDNIcon/687.png)
![HSS HSS](https://fraisa.cdn.celum.cloud/CDNIcon/4406.png)
![particularly suitable for HRC 48-56 HRC 48-56](https://fraisa.cdn.celum.cloud/CDNIcon/683.png)
![particularly suitable for HRC 56-60 HRC 56-60](https://fraisa.cdn.celum.cloud/CDNIcon/685.png)
![particularly suitable for HRC > 60 HRC > 60](https://fraisa.cdn.celum.cloud/CDNIcon/687.png)
![HSS HSS](https://fraisa.cdn.celum.cloud/CDNIcon/4406.png)
![HPC Schruppen Eckradius Seitlich HPC Schruppen Eckradius Seitlich](https://fraisa.cdn.celum.cloud/CDNIcon/3348.png)
![HPC Schruppen Eckradius Nuten HPC Schruppen Eckradius Nuten](https://fraisa.cdn.celum.cloud/CDNIcon/3349.png)
![Eckradius F Teilschnitt Eckradius F Teilschnitt](https://fraisa.cdn.celum.cloud/CDNIcon/3572.png)
![Corner radius pre-finishing (Pre-Finishing PF) steep slopes Corner radius pre-finishing (Pre-Finishing PF) steep slopes](https://fraisa.cdn.celum.cloud/CDNIcon/451.png)
![Corner radius finishing (Finishing F) steep slope Corner radius finishing (Finishing F) steep slope](https://fraisa.cdn.celum.cloud/CDNIcon/448.png)
![Corner radius finishing (Finishing F) flat surfaces Corner radius finishing (Finishing F) flat surfaces](https://fraisa.cdn.celum.cloud/CDNIcon/447.png)
![Corner radius super-finishing (Super-Finishing SF) steep slopes Corner radius super-finishing (Super-Finishing SF) steep slopes](https://fraisa.cdn.celum.cloud/CDNIcon/457.png)
![Roughing HDC-S (partial cut) Roughing HDC-S (partial cut)](https://fraisa.cdn.celum.cloud/CDNIcon/530.png)
![Eckradius PF Teilschnitt Eckradius PF Teilschnitt](https://fraisa.cdn.celum.cloud/CDNIcon/3578.png)
![Penetration, helical interpolation Penetration, helical interpolation](https://fraisa.cdn.celum.cloud/CDNIcon/518.png)
![Penetration, ramping Penetration, ramping](https://fraisa.cdn.celum.cloud/CDNIcon/519.png)
![HPC Schruppen Eckradius Seitlich HPC Schruppen Eckradius Seitlich](https://fraisa.cdn.celum.cloud/CDNIcon/3348.png)
![HPC Schruppen Eckradius Nuten HPC Schruppen Eckradius Nuten](https://fraisa.cdn.celum.cloud/CDNIcon/3349.png)
![Eckradius F Teilschnitt Eckradius F Teilschnitt](https://fraisa.cdn.celum.cloud/CDNIcon/3572.png)
![Corner radius pre-finishing (Pre-Finishing PF) steep slopes Corner radius pre-finishing (Pre-Finishing PF) steep slopes](https://fraisa.cdn.celum.cloud/CDNIcon/451.png)
![Corner radius finishing (Finishing F) steep slope Corner radius finishing (Finishing F) steep slope](https://fraisa.cdn.celum.cloud/CDNIcon/448.png)
![Corner radius finishing (Finishing F) flat surfaces Corner radius finishing (Finishing F) flat surfaces](https://fraisa.cdn.celum.cloud/CDNIcon/447.png)
![Corner radius super-finishing (Super-Finishing SF) steep slopes Corner radius super-finishing (Super-Finishing SF) steep slopes](https://fraisa.cdn.celum.cloud/CDNIcon/457.png)
![Roughing HDC-S (partial cut) Roughing HDC-S (partial cut)](https://fraisa.cdn.celum.cloud/CDNIcon/530.png)
![Eckradius PF Teilschnitt Eckradius PF Teilschnitt](https://fraisa.cdn.celum.cloud/CDNIcon/3578.png)
![Penetration, helical interpolation Penetration, helical interpolation](https://fraisa.cdn.celum.cloud/CDNIcon/518.png)
![Penetration, ramping Penetration, ramping](https://fraisa.cdn.celum.cloud/CDNIcon/519.png)
![Corner radius end mills HX Corner radius end mills HX product photo back L](https://fraisa.cdn.celum.cloud/CDNProductDetail/4914.png)
![Corner radius end mills HX Corner radius end mills HX product photo front L](https://fraisa.cdn.celum.cloud/CDNProductDetail/4758.png)
![Products that have a high level of specialisation for applications that go beyond (eXtra!) general applications and performance demands. Performance rating - X-Generation](https://fraisa.cdn.celum.cloud/CDNIcon/601.png)
- Finishing
- Roughing HDC
- Roughing HPC
![Full carbide tools with a cylindrical shank: shank version in accordance with DIN 6535 HA Full carbide tools with a cylindrical shank Schaftausfuehrung_HA](https://fraisa.cdn.celum.cloud/CDNIcon/3319.png)
DURO-Si
![Products that have a high level of specialisation for applications that go beyond (eXtra!) general applications and performance demands. Performance rating - X-Generation](https://fraisa.cdn.celum.cloud/CDNIcon/601.png)
Ø Code | d1 0/-0.01 | d2 h4 | d3 | l1 | l2 | l3 | l4 | r 0/+0.015 | α° | z |
---|---|---|---|---|---|---|---|---|---|---|
218 | 4 | 6 | 3.7 | 57 | 11 | 16 | 20.82 | 0.2 | 3 | 4 |
![Products that have a high level of specialisation for applications that go beyond (eXtra!) general applications and performance demands. Performance rating - X-Generation](https://fraisa.cdn.celum.cloud/CDNIcon/601.png)