Cylindrical/Square end mills MFC Alu
Product ID: 8685501
Smooth-edged, chip breaker, version 5.2xd, High-performance penetration edge, central air/cooling channel
![Fine grain carbide. Hardness 1600 HV. Co content 10%. Cutting tool substrate material - Hm MG10](https://fraisa.cdn.celum.cloud/CDNIcon/1534.png)
![The tool is furnished with a corner radius. For every diameter the size of the radius is listed in the corresponding data table of the catalogue. Form of the corner of the cutting edges - Corner radius](https://fraisa.cdn.celum.cloud/CDNIcon/323.png)
![Helix angle 30° Rake angle 20° Helix angle 30° Rake angle 20°](https://fraisa.cdn.celum.cloud/CDNIcon/3542.png)
![Finely balanced tools • Finely balanced tools at least G2.5 at n=20,000 rpm or permissible residual imbalance <1gmm • Reduction or elimination of the balancing process in the case of finely balanced clamping devices • Improved surface quality as a result of increased running smoothness and fewer vibrations • Increase in the service life of the machine spindle Tool technologies - Finely balanced tools](https://fraisa.cdn.celum.cloud/CDNIcon/331.png)
![Milling tool with chip breaker • Shorter chip lengths at high axial infeed rates, improving chip removal from both the component and the machine • Improved optimisation and process reliability • High multi-functionality of the smooth-cutting tool is maintained Tool technologies - Milling tool with chip breaker](https://fraisa.cdn.celum.cloud/CDNIcon/337.png)
![Milling tool with increased core diameter • Improved tool rigidity and less tool deflection • Higher performance in the area of the infeeds ap, ae and of the feed rate fz • Better component accuracy through less tool deflection Tool technologies - Milling tool with increased core diameter](https://fraisa.cdn.celum.cloud/CDNIcon/333.png)
![High-performance penetration edge • Easy-cutting high-performance penetration edge for high penetration angles • Higher performance, tool life and process reliability for penetration • High functionality with cutting data from ToolExpert HelixRamp Tool technologies - High-performance penetration edge](https://fraisa.cdn.celum.cloud/CDNIcon/378.png)
![Supporting chamfer • Support for the tool in the radial and axial directions • Reduced vibrations and higher performance • Improved surface quality as a result of increased running smoothness Tool technologies - Supporting chamfer](https://fraisa.cdn.celum.cloud/CDNIcon/391.png)
![Fine grain carbide. Hardness 1600 HV. Co content 10%. Cutting tool substrate material - Hm MG10](https://fraisa.cdn.celum.cloud/CDNIcon/1534.png)
![The tool is furnished with a corner radius. For every diameter the size of the radius is listed in the corresponding data table of the catalogue. Form of the corner of the cutting edges - Corner radius](https://fraisa.cdn.celum.cloud/CDNIcon/323.png)
![Helix angle 30° Rake angle 20° Helix angle 30° Rake angle 20°](https://fraisa.cdn.celum.cloud/CDNIcon/3542.png)
![Finely balanced tools • Finely balanced tools at least G2.5 at n=20,000 rpm or permissible residual imbalance <1gmm • Reduction or elimination of the balancing process in the case of finely balanced clamping devices • Improved surface quality as a result of increased running smoothness and fewer vibrations • Increase in the service life of the machine spindle Tool technologies - Finely balanced tools](https://fraisa.cdn.celum.cloud/CDNIcon/331.png)
![Milling tool with chip breaker • Shorter chip lengths at high axial infeed rates, improving chip removal from both the component and the machine • Improved optimisation and process reliability • High multi-functionality of the smooth-cutting tool is maintained Tool technologies - Milling tool with chip breaker](https://fraisa.cdn.celum.cloud/CDNIcon/337.png)
![Milling tool with increased core diameter • Improved tool rigidity and less tool deflection • Higher performance in the area of the infeeds ap, ae and of the feed rate fz • Better component accuracy through less tool deflection Tool technologies - Milling tool with increased core diameter](https://fraisa.cdn.celum.cloud/CDNIcon/333.png)
![High-performance penetration edge • Easy-cutting high-performance penetration edge for high penetration angles • Higher performance, tool life and process reliability for penetration • High functionality with cutting data from ToolExpert HelixRamp Tool technologies - High-performance penetration edge](https://fraisa.cdn.celum.cloud/CDNIcon/378.png)
![Supporting chamfer • Support for the tool in the radial and axial directions • Reduced vibrations and higher performance • Improved surface quality as a result of increased running smoothness Tool technologies - Supporting chamfer](https://fraisa.cdn.celum.cloud/CDNIcon/391.png)
![good to adequate suitability for Al Aluminium > 99% Al Aluminium > 99%](https://fraisa.cdn.celum.cloud/CDNIcon/670.png)
![particularly suitable for Al Aluminium Alloy Al Aluminium Alloy](https://fraisa.cdn.celum.cloud/CDNIcon/667.png)
![good to adequate suitability for Al Aluminium Cast Al Aluminium Cast](https://fraisa.cdn.celum.cloud/CDNIcon/668.png)
![good to adequate suitability for Plastic Thermoplast Plastic Thermoplast](https://fraisa.cdn.celum.cloud/CDNIcon/690.png)
![good to adequate suitability for Cu Copper Cu Copper](https://fraisa.cdn.celum.cloud/CDNIcon/679.png)
![good to adequate suitability for Al Aluminium > 99% Al Aluminium > 99%](https://fraisa.cdn.celum.cloud/CDNIcon/670.png)
![particularly suitable for Al Aluminium Alloy Al Aluminium Alloy](https://fraisa.cdn.celum.cloud/CDNIcon/667.png)
![good to adequate suitability for Al Aluminium Cast Al Aluminium Cast](https://fraisa.cdn.celum.cloud/CDNIcon/668.png)
![good to adequate suitability for Plastic Thermoplast Plastic Thermoplast](https://fraisa.cdn.celum.cloud/CDNIcon/690.png)
![good to adequate suitability for Cu Copper Cu Copper](https://fraisa.cdn.celum.cloud/CDNIcon/679.png)
![Roughing HPC, laterally (partial cut) Roughing HPC, laterally (partial cut)](https://fraisa.cdn.celum.cloud/CDNIcon/531.png)
![Roughing HPC, slots (full cut) Roughing HPC, slots (full cut)](https://fraisa.cdn.celum.cloud/CDNIcon/532.png)
![Finishing (partial cut) (Finishing F) Finishing (partial cut) (Finishing F)](https://fraisa.cdn.celum.cloud/CDNIcon/520.png)
![Roughing HDC-S (partial cut) Roughing HDC-S (partial cut)](https://fraisa.cdn.celum.cloud/CDNIcon/530.png)
![Roughing HDC-P (partial cut) Roughing HDC-P (partial cut)](https://fraisa.cdn.celum.cloud/CDNIcon/529.png)
![Roughing HDC-P (partial cut) (Pre-Finishing PF) Roughing HDC-P (partial cut) (Pre-Finishing PF)](https://fraisa.cdn.celum.cloud/CDNIcon/527.png)
![Penetration, helical interpolation Penetration, helical interpolation](https://fraisa.cdn.celum.cloud/CDNIcon/518.png)
![Roughing HPC, laterally (partial cut) Roughing HPC, laterally (partial cut)](https://fraisa.cdn.celum.cloud/CDNIcon/531.png)
![Roughing HPC, slots (full cut) Roughing HPC, slots (full cut)](https://fraisa.cdn.celum.cloud/CDNIcon/532.png)
![Finishing (partial cut) (Finishing F) Finishing (partial cut) (Finishing F)](https://fraisa.cdn.celum.cloud/CDNIcon/520.png)
![Roughing HDC-S (partial cut) Roughing HDC-S (partial cut)](https://fraisa.cdn.celum.cloud/CDNIcon/530.png)
![Roughing HDC-P (partial cut) Roughing HDC-P (partial cut)](https://fraisa.cdn.celum.cloud/CDNIcon/529.png)
![Roughing HDC-P (partial cut) (Pre-Finishing PF) Roughing HDC-P (partial cut) (Pre-Finishing PF)](https://fraisa.cdn.celum.cloud/CDNIcon/527.png)
![Penetration, helical interpolation Penetration, helical interpolation](https://fraisa.cdn.celum.cloud/CDNIcon/518.png)
![Performance rating - Performance Performance rating - Performance](https://fraisa.cdn.celum.cloud/CDNIcon/5873.png)
Smooth-edged, chip breaker, version 5.2xd, High-performance penetration edge, central air/cooling channel